Learning Tv Remote Control Instructions. Locate the button you want to learn on the training remote. • the rc82v remote control works in ir and rf mode.
Apart) from the training remote. Turn on the device that you want to assign to a m ode key. Press and release the vcr, tv or cable button.
The Status Led Will Blink Green Four Times As The Remote Powers Up (About 5 Seconds).
It keeps only 6 most important big buttons, very convenient for the old and children to use. Use to change the channel, enter a pin, enter a zip code, etc. Go to what tif •none of the codes workfor instructions.
If Programming For Aux, Press And Release Aux Button First, Then Press The Device Type To Be Programmed.
Release bothkeys and the mode keys blink twice. To learn functions, the original remote should be approximately 3cm from the ofa remote, pointing towards it as shown below: Pointing the remote at the tv or another device, press the power button on the remote and wait 2 seconds.
Turn On Your Tv Or Another Device You Wish To Control.
Press and hold the set button until the red led blinks twice, then release. Hold down tv power and mute until the red led blinks twice. Pick up your remote and remove the “pull” tab (on back) by pulling away from the remote.
Press And Release The Vcr, Tv Or Cable Button.
Pair your remote for voice control On the inteset remote, press the device mode button (ie: Select numbers and then select done to enter a numeric value.
Turn On The Device That You Want To Assign To A M Ode Key.
• the rc82v remote control has a directional pad. Wait until the power button comes on, and then release both buttons. Tv and television manuals and free pdf instructions.