Yamaha Receiver No Tv Sound. Depending on the tv, some jacks may not be available. The audio can go to the tv or to your receiver, but not both.
Yamaha RXV579 AV Receiver from www.av2day.com
* be careful of devices that require scheduled recording or shutdown. The audio can go to the tv or to your receiver, but not both. No sound with pure direct mode or with the test tone dante01 distinguished member nov 12,.
No Sound With Pure Direct Mode Or With The Test Tone Dante01 Distinguished Member Nov 12,.
Use a continuity / ohmmeter. Select sound → speakers → audio system. Depending on the tv, some jacks may not be available.
Each Speaker Should Read 8Ω.
The audio can go to the tv or to your receiver, but not both. The receiver must have a digital input and surround sound 5.1 support. However, starting today, i get no sound at all via any of the hdmi inputs.
Yamaha Av Receiver Had An Issue With No Soundi Found An Setting That Fixed The Problem.
Unfortunately, i can't seem to get the surround sound working with hdmi from the cable box as input. Up to 20% cash back check the actual speakers plus its wires disconnected from the yamaha. This can be done via the receiver's manual speaker configurations.
You Don’t Need To Get Stressed Out.
The audio works through the speakers on a normal audio source through the amp and the samsung remote can even turn the volume up/down plus sync the power state. Select display & sound → audio output → speakers → audio system. To get sound from your receiver and connected speakers, the hdmi audio output setting needs to be set to off on your receiver.
If The Test Tone Is Not Output
On the screen of the receiver when sound is available the selected speaker setup is indicated for example 2 channel stereo or 5 channel surround, but now it is not showing it will indicate pcm but that is it. Next, please check the following 3 points. I have selected the tv audio source on the amp.
